Isostatic Pressing Molds for Ceramic

Isostatic pressing equipment and its operation process

First put the prepared blank into an elastic mold made of plastic or rubber, put it in a high-pressure container, seal it and inject it into a high-pressure liquid medium.

The pressure is transmitted to the elastic mold to pressurize the blank, and then the pressure is released to take out the mold, and the formed blank is taken out from the mold, the liquid medium can be water, oil or glycerin.

However, it is advisable to use a medium with low compressibility, such as brake fluid or anhydrous glycerin. The elastic mold material should be rubber or similar plastics with good elasticity and good oil resistance.

Characteristics of ceramic isostatic pressing method

It can form complex, large and thin and long products that cannot be produced by ordinary methods, and the high quality of the forming can increase the forming pressure without increasing the difficulty of operation, and the pressure effect is better than other dry pressing methods.

Because the green body is under uniform pressure in all directions, its density is high and uniform, and its firing shrinkage is small, so it is not easy to deform. The mold is easy to make, long in use, and low in cost. It can use less or no binder.

Wear-resistant ceramic tube product application

1. Pipelines that require high wear resistance: thermal power generation, coal and ash transportation in thermal power plants, coal powder transportation pipelines, tailings transportation and concentrate transportation pipelines in mineral processing plants, port slurry and sediment transportation pipelines, pulverized coal slurry transportation pipelines, etc.

2. Clean coal transportation pipelines in heavy medium coal preparation plants require high corrosion resistance thermal power generation desulfurization slurry and slag transportation pipelines.

3. Pipeline for conveying molten aluminum.

4. All kinds of roads that require high wear resistance, high corrosion resistance and high temperature resistance.

    Jiangsu High Industry on the research and development and production of high-performance polyurethane isostatic pressing molds. Through in-depth cooperation with many isostatic pressing equipment manufacturers and in-depth study of the industry, the developed isostatic pressing polyurethane mold series products have the characteristics of long service life, high precision, small deformation, easy demoulding, etc., and are widely used in ceramics, etc. Static pressing mould, cemented carbide isostatic pressing mould, rare earth permanent magnet material isostatic pressing mould, graphite isostatic pressing mould, etc.

We support all kinds of customization, if you need it, please contact us.

Phone/whatsapp:+86 18234744811

Email:sales@highindustryco.com

Polyurethane Products               Pu Products                Rubber Mold              Plastic Mold